Title   |
Picture | |
|---|---|---|
| add to favorites | Ford 9" | No Picture |
| Ford 9" pumpkin with 6.20 gears and Detroit locker. 29 spline. Gears and locker are brand new and need to be broken in. $500.00. Contact Paul at 412-1158 | ||
| add to favorites | 327 Street motor | No Picture |
| 327 Street Rod Motor. 194 Fuelie heads, 540 lift, 11:1 pop-up pistons. Rebuilt by Kidd Performance & Dyno. $2000.00 OBO Jerry (208)280-3177 |
||
| add to favorites | 355 Chevy motor | No Picture |
| I have a 355 Chevy, built for 44 Holley, 2 Barrell,202 Fuelie heads. Only 6 races on motor. Have $8100 into mototr, built by Kidd Performance & Dyno in Twin Falls. $2000.00 OBO Jerry (208)280-3177 |
||
| add to favorites | pinto manual 4 speed tranny | No Picture |
| came out of a pinto about a 78? contact Dion States, statesconst@aol.com. or 870-4140 $45 | ||
| add to favorites | B+G TRANSMISSION FLUSH MACHINE | No Picture |
| B+G TRANSMISSION FLUSH MACHINE REFURBISHED ASKING $1000 CALL FOR MORE INFORMATION CRAIG COTTA 208-340-1700 |
||
| add to favorites | FIVE STAR RACE BODY | No Picture |
| 2001 FIVE STAR GRAND PRIX BODY OFF SET WITH ALL THE GLASS FRONT BRAKE DUCTS AND SCREENS BUY IT NOW: $500 COULD BE MOUNTED FOR EXTRA $600 CALL FOR MORE INFORMATION CRAIG COTTA 208-340-1700 |
||
| add to favorites | Pro 4/Late Model Lites | No Picture |
| Pro 4/Late Model Lite parts for sale, 1. Master Cylinders/Brakes/Clutch(Howe) $40.00 a piece including pedals. 2. 71/2 inch rear ends/4 of them (1/2 mile, 2-1/4 miles, 3/8 mile) $100.00 a piece. 3. Brake bias control (Wilwood) $20.00 4. Holly Red/electric fuel pump $20.00 5. Brake Calipers/Rotors $40.00 a piece (Front or back) 6.. Seat Belts $35.00 7. Racing Muffler I can be reached at the following, Gary Allen E-mail: shownogo@msn.com Phone: 509-924-7522 Travis Allen 993-2190 Thank you |
||
| add to favorites | SBC 350 Crank, Rods, Pistons, & HEI | No Picture |
| I have a set of lightly used 350 SBC connecting rods, recently conditioned and big end resized (stock rod bolts) with .030 TRW forged pistons attached (rings need removed). Also 350 SBC stock cast crank .010 rods and .010 mains. All parts were in a motor that had 30,000 miles on it. Was taken apart to put stroker parts in it. Also have a SBC GM HEI distributor. Mostly new parts in it. $75 for HEI Distributor, $125 for Crank/Rods/Pistons. Firm on prices. pcturner2@msn.com |
||
| add to favorites | '95 chevy lt1 engine | No Picture |
| '95 chevy lt1 engine came outa caprice cop car 80,000 miles ran great when pulled oem roller cam call rob at 208-941- $500 or trade for late model parts | ||
| add to favorites | TCI Powerglide circle track valve body and torque converter | No Picture |
| TCI valve body #744500 $150 TCI torque converter #741020 $300 both ran for two seasons and work excellent Dustin @ 440-4478 |
||
| add to favorites | Need Engines built or Rebuilt |  |
| Engine Building has been in my family for over 30 years. will do anything from 4 cylinder motors to Huge v8 410 blocks. all machine work done by Boise Cylinder Head. I will get the most power out of your power plant that we can get out of it and still pass tech spec. pleas Call mark floyd JR 208-949-3238 | ||
| add to favorites | 4.3 | No Picture |
| 78 4.3 complete with trany turbo 350 300.00 john 954 4126 |
||
| add to favorites | geo storm parts |  |
| for you hornet storm owners, if you need parts, give me a call, 371-4521 | ||
| add to favorites | 4412 carb - ready to bolt on and go | No Picture |
| Race ready 4412 holley carb that has been soaked, blasted and completely rebuit with the best AED kit. $175 takes it. other carbs available also. let me know what you are looking for or if you need one rebuilt. Dustin @ 440-4478 or competitioncarburetors@yahoo.com | ||
| add to favorites | Camel hump heads MUST GO ASAP | No Picture |
| Complete set of fresh camel hump heads ready to bolt on. 2.02 and 1.6 valves, screw in studs, guide plates. Never ran since freshened. $300.00 Terry 208-283-3862 |
||
| add to favorites | (4) late model wheels circle racing $75.00 |  |
| For sale (4) racing wheels used. $75.00 for all 4. Straight never bent. Black in color . 5" wheel offset. I believe they are 5 on 5. These are racing wheels designed for a late model race car. They are NOT highway legal. Any questions please let me know. Thanks Tod 703-1126 or e-mail tkidd33@cableone.net A little dusty but will clean up fine. See craigslist listing 1259909928 for additional photos. |
||
| add to favorites | 360 sprint car engine 5000$ obo | No Picture |
| i have 360 winged sprint car engine. alcohol injected. complete ready to run with exhaust oil tank fuel pump dialajet, only ran six races. call me if your interested 6972966 jason |
||
| add to favorites | Wanted Hoosier 970's used | No Picture |
| will pay 5.00 - 20.00 for good used 970's call Jim 208-280-1714 |
||
| add to favorites | 350 Chevy Motor Race Ready | No Picture |
| 350 30 over, balanced, 202 stainless steel valves, good seals, race springs, dual roller rockers 1.5 and 1.6 Valves are loose for storage. I had the heads done and it has not been fired since valve job and checked. Checked the bottom end and it is perfect. It has clevit 77 Brgs. 20-20 crank 11.5 comp. with race pistons. I ran it in my modified, it does real well at Meridian. Complete and ready to go. For more information call David at 859-4113 | ||
| add to favorites | Firebird Hoods | No Picture |
| 2 75-79 Firebird Hoods for sale. Call Shirley at 208-860-2311. $75 each. | ||
| add to favorites | WANTED: modified engine | No Picture |
| WANTED: ASA Modified engine complete ( carb to pan ) ready to drop in and race. 350-406 CI. Open to a 602 crate motor. My budget is $ 3,000.00. Have cash and ready to buy. Call Steve 208-965-1912 or email me at: stevenrodenbaugh@yahoo.com | ||
| add to favorites | 2.3 L Mini stock engines | No Picture |
| I have two 2.3L Engines. One is new and blueprinted to Mini stock rule book w/D port head $3,500.00. The other is a rebuilt core also blueprinted to class specs $2,500.00. Both engines are Completely LEGAL, and will run competitively! I ran the #3 car last season and always qualified in the top 6 with throw away tires. I know these engines can keep up just fine. Willing to blueprint your motor as well. Call 602-8472 for more info. |
||
| add to favorites | CLEANING UP | No Picture |
| FORD 9IN. HOUSING 75.00 3rd MEMBER 28SPLINE 4.20 GEARS 150.00 FORD 5.83 RICHMOND RING &PINION 100.00 10boltCHEAVY 3.90 RICHMOND RING&PINION 100.00 1980 FIREBIRD FORMULA HOOD 100.00 CALL BRIAN 899 9920 | ||
| add to favorites | wheels and tires | No Picture |
| 17 alum wheels 125.00 ea 4 hats for alum wheels 75.00 ea 4 f45 50.00 ea 8 f35 50.00 ea going dirt racing |
||
| add to favorites | Wilwood 3/4" master cylinders | No Picture |
| I have two new bench bleed and mounted but never ran wilwood 3/4" master cylinders. Looking to get $40.00 dollars each. Dennis 249-6189 |
||
| add to favorites | Experienced NASCAR Crew Chief Available!! | No Picture |
| I am new to the Boise area. I have over 20 years of Cup, Busch and Truck experience. I am not interested in helping a fast car go fast. I am looking for a top 10 team that has a good car and good equipment that wants to improve. I really do not care what division. Email me if you are in need of a crew chief or car chief. stevenrodenbaugh@yahoo.com Steve |
||
| add to favorites | Camel hump heads | No Picture |
| These are a built set of heads with brand new valves, screw in studs and guide plates. bolt on horsepower! $450.00. Can include a full set of Crowler roller tip rockers for an additional $50.00 Terry 208-283-3862 |
||
| add to favorites | 400 sbc block | No Picture |
| virgin 400 sbc block with a crank. There has been nothing done to the block crank good for a core. $200. Terry 208-283-3862 |
||
| add to favorites | 350 block 30 over | No Picture |
| this block is ready to build. has been bored 30 over. Nothing taken of the deck. $150.00 Terry 208-283-3862 |
||
| add to favorites | 350 block | No Picture |
| virgin 350 block for sale. $75.00 Terry 208-283-3862 |
||
| add to favorites | (4) Circle Racing Wheels Late model $75.00 |  |
| For sale (4) racing wheels used. $75.00 for all 4. Straight never bent. Black in color . 5" wheel offset. I believe they are 5 on 5. These are racing wheels designed for a late model race car. They are NOT highway legal. Any questions please let me know. Thanks Tod 703-1126 or e-mail tkidd33@cableone.net A little dusty but will clean up fine. See craigslist listing 1146238003 for additional photos. |
||
| add to favorites | toyota celica parts |  |
| have plenty of parts for 1982 -1985 toyota celica race cars billy 371-4521 |
||
| add to favorites | J bar/panhard mount | No Picture |
| This is a new double slider panhard mount / J, bar mount for a ford 9" center section. buyer pays shipping, selling as is, seller may end auction at any time for purchase of amount at 40.00, weighs approx 8lbs. Good Luck bidding 208-761-1876 |
||
| add to favorites | Craftsman truck lug nuts | No Picture |
| This is a used set of 20 - 5.8 fine thread lug nuts off a Nascar Craftsman truck during a pit stop at Kansas city- July 04, they arein very good shape, selling the set as is, NO reserve, buyer pays shipping- seller may end auction at any time. Photo date is not right, it was taken nov,07 208-761-1876 |
||
| add to favorites | Engine plate for modified or other | No Picture |
| This is a good used engine plate / mid plate for a IMCA or grand american modified for a small block chevy, buyer pays shipping, selling as is, seller may end auction at any time for local purchase. will ship when paymnt clears. weighs approx-12# 208-761-1876 |
||
| add to favorites | Simpson arm restraints-30.00 | No Picture |
| Simpson sprint car arm restraints,30.00 used, selling as is, buyer pays shipping if any, will drop at local shipper for n/c 761-1876 | ||
| add to favorites | Car For Sale Late Model | No Picture |
| Car For Sale;Late Model Roller;Excellent Car w/quick change call 208-303-7533anytime |
||
| add to favorites | Hamburger oil pan/New | No Picture |
| This is a brand new circle or drag pan Chevy small block (Hamburger) witth some minor rust in screen baffle,can be removed and cleaned, It fits a Full circle rear main cap such as a vortec eng or newer, buy it as is NO RESERVE buyer pays shipping, buyer responsible for application, seller may end auction at any time if reasonable offer is made, happy bidding. may end auction if sold locally. any questions call 208-761-1876 I will box and drop at local shipper for no xtra charge. |
||
| add to favorites | racing tires | No Picture |
| have 5 old street stock tires. that would be good for the thunder stock class. they are goodyear eagle racing tires 37.0 x 8.0 -15 tires are like brand new never have been raced and have been kept inside storage. 40.00 each obo 850-3763 Bruce |
||
| add to favorites | SB chevy heads | No Picture |
| Several sets of sb chevy heads,also roller rockers and girdles call for info 761-1876 | ||
| add to favorites | Spindles & rotors | No Picture |
| I have several chevy spindles and New rotors 761-1876 |
||
| add to favorites | Ford 9" gears 4 sale | No Picture |
| Click on this link for gear info, or call 761-1876 for more info https://www.racewaybids.com/auction/item.php?id=957 |
||
| add to favorites | Stud girdles | No Picture |
| One set of older gold stud girdles and 3/8 barrle locks for small block chevy, selling as is buyer pays shipping. weighs approx 10# call 761-1876 for more info |
||
| add to favorites | Alcohol carb 4 sale | No Picture |
| Chuck Nuytten Holly alcohol carb, all custom worked in texas by Chuck Nuytten, This carb works very well and hasn't been used for several years so it would need the gaskets replaced and cleaned just to be on the safe side, this carb is like new, It started as a model 4150-double pumper- w/mechanical secondarys and the cfm was 750 but has been custom worked and flowed to 900 cfm, it has no choke horn, selling as is, buyer pays shipping, . any questions you can call 208-761-1876 |
||
| add to favorites | Steering Quickners | No Picture |
| https://www.racewaybids.com/auction/item.php?id=954 There are two steering quickners, one is a howe and one is a afco, one is 1 1/2 to one ratio and one is 2 to one ratio, you can buy one or both, will sell each for 50.00 your choice. selling as is, buyer pays shipping. approx 3to 4 lb, will drop at local shipper for n/c. 208-761-1876 |
||
| add to favorites | mid 70's camaro control arms | No Picture |
| mid 70's camaro control arms. $75 for all of them, both sides,upper and lower. call 855-0868 thanks | ||
| add to favorites | street stock parts | No Picture |
| 350 block and all parts needed for assembly $450.00. 400 bare block $250.00. Vortec heads rebuilt recently and not raced yet $550.00. Engine stand, engine hoist, various chevy parts. Call Aaron 447-9077 | ||
| add to favorites | Ford Mustange engine parts | No Picture |
| New Main Bearings and caps Pistons Water Pump Oil Pan All for $100 Was to be used for Mini-Stock |
||
| add to favorites | MINI-STOCK WHEELS | No Picture |
| I have five 13x7 steel racing wheels for sale. These have a 4 on 4" bolt pattern. Two have 2 1/2" offset, two have 3 3/4" offset and one has 3 1/2" offset. They fit vega,monza and many others. I will take $125.00 for the set. Please call 365-0906 or 272-1153. | ||
| add to favorites | 9" Rearend For Sale | No Picture |
| I have a 9" rearend for sale,Its 56 1/4" in total width,29" from center to the right side drive plate.I has 5.43 gears,full spool and h/d axles.It also has top link mount.It came out of a LML.Call if interested. Ron Hayes 284-3636 |
||
| add to favorites | late model parts | No Picture |
| 4" c&r radiator with heat exchanger. $200 SPD peremeter car headers 1 set spread port 1 set not. $300 pair. medium hutchens device new $75 used Sierra 4 piston calipers front and rear $150 used Joes 5x5 aluminum hubs all 4 $250 lots more. E-mail me Danieljames4@hotmail.com |
||
| add to favorites | Cheap Parts | No Picture |
| I have a bunch of left over parts from a racecar that I need to sell. Can deliver if arranged. Used set 180* headers for sbc............$50obo Used set(4) wheels 3-15x10, 1-15x12......$40obo New pair(2) circle wheels 15x10..........$50obo Used 4 blade fan. 1 w/spacer, 1 w/o......$10ea Used springs, Torque bar.................$20all 2Spindles w/brake brackets. ? on fit.....$35all Used Gleason Q/C spider gears............$500 Set(4) used rotors 12.25x1.25 8 bolt.....$40all Used come-a-long.........................$10obo Used Moroso cable driven tach............$15obo Aluminum breather tank...................$15obo Complete set 90's chev truck lights(fnt).$40all Aluminum sbc flexplate cover.............$25obo Set r134a gauges.........................$50obo 90's chev p/u washer bottle w/pump.......$15obo Pair of used car ramps...................$40obo All located in Salt Lake City. Call Scott at 801-688-1948 or email racininutah@msn.com for pics |
||
| add to favorites | misc parts. | No Picture |
| i have a c-6 transmission, $250.rebuildable surburan transmission,$80 with good transfer case and driveline.$175. contact Dion States statesconst@aol.com | ||
Please register or log in.
